Metallic Filter Cartridges
Metallic filter cartridges are a re-usable surface filter manufactured using stainless steel wire mesh filter media. They are designed to withstand demanding working conditions as well as strong cleaning procedures such as backwash or chemical treatment. They can also be cleaned in an ultrasonic bath, with high pressure water or by simply brushing the surface of the wire mesh.
Stainless steel has a wide chemical compatibility, and use at high temperature can be achieved in relation to the material joining the end cap. Their low pressure loss also makes them suitable for use with high viscosity fluids.
Our range has two construction options, either non-pleated or pleated which provides enhanced surface area and filter lifetime.
- Stainless steel 304 or 316.
- 10” to 40” lengths.
- Available micron ratings : 10,25,40,70,100,150,250,300,400,750.
- End fittings : Double open ended with flat gaskets, Code 3, Code 7, Code 8.
- Standard O.D. for all end cap configurations : 65mm
- Standard I.D.: Double open ended – 26mm. Code 7 – 36mm. Code 8 – 33mm.
- Gasket materials : Nitrile, EPDM, Viton, Silicone, PTFE.
Please contact us for further information or view our range of Filter Cartridges.
Related Products
-
LV1 Stainless Steel Single Cartridge Housings
The LV1 series single cartridge vessels consist of an investment cast head with 1” BSP (F) inline connections and 1/8” BSP (F) vent, a quick release clamp, and a bowl with ¼” BSP (F) bottom drain. LV1 vessels are produced in four sizes to suit industry standard 10”, 20”, 30” and 40” nominal length filter cartridges. The universal head can be configured to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges.
-
Multi Round Stainless Steel Cartridge Housings
Multi round cartridge vessels feature a universal bottom cup to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges. Our vessel design therefore provides versatility – by simply exchanging the cartridge top sealing components, the vessel can be converted to suit either double open ended cartridges or to suit code 3 and 8 cartridges. For use with double open ended cartridges, vessels are provided with a cup and spring component which achieves both top sealing and cartridge core location, and a compression plate.
-
Plastic Cartridge Housings
Plastic Housings – For applications involving non-aggressive fluids, these are a low cost, small sized single cartridge housings to suit 10″ or 20″ cartridges. They consist of a polypropylene body and screw on lid which forms a leak proof seal by compression of an o ring. The body can either be opaque or clear. 1/2″ – 1 1/2″ BSP screwed inline connections are available as standard. An optional pressure release button is available on the inlet port. Available accessories include spanners and mounting brackets.