Pleated Filter Cartridges
Pleated filter cartridges are surface filters for removing hard, non-deformable particles from a liquid stream. They feature a large filter area, a high dirt holding capacity and consequently a long filtration lifetime. The sharp cut-off characteristics created by the filter media ensures dependable and highly efficient particle removal at the designated micron rating. Pleated cartridges are therefore widely used as particle size classification filters, as well as being utilised as either final filters or as protection for expensive membrane filter cartridges.
EconoPleat Series
The Econopleat series of pleated cartridges consist of 3 layers of filter media, resulting in a high surface area cartridge that performs well with high flow rates, whilst achieving a good dirt holding capacity with no compromise to operational pressure drops.
Econopleat PP : 100% polypropylene melt blown filter media with thermally bonded end caps.
Econopleat GF : Borosilicate media with polypropylene support layers with thermally bonded end caps.
Econopleat PE : Polyester media with polypropylene end caps
- Surface area : >0.34m2 per 10” length.
- 4 7/8” to 40” lengths.
- Single piece construction.
- Standard I.D. 27.5mm D. 64mm.
- Large outer diameter 116mm versions available, 10” – 40”.
- Available micron ratings (@ 95% efficiency): Econopleat PP: 2 – 50 micron. Econopleat GF: 2,5 10,20. Econopleat PE: 5,10,20,50
- Polypropylene core and polypropylene end caps (for all media).
- End fittings : Double open ended with flat gaskets, Code 3, Code 7, Code 8.
- Gasket materials : Nitrile, EPDM, Viton, Silicone, PTFE encapsulated Viton, PTFE encapsulated Silicone.
- Maximum recommended operating temperature 80o
- 75 Bar max dP.
Please contact us for further information or view our range of Filter Cartridges.
Related Products
-
LV1 Stainless Steel Single Cartridge Housings
Read moreThe LV1 series single cartridge vessels consist of an investment cast head with 1” BSP (F) inline connections and 1/8” BSP (F) vent, a quick release clamp, and a bowl with ¼” BSP (F) bottom drain. LV1 vessels are produced in four sizes to suit industry standard 10”, 20”, 30” and 40” nominal length filter cartridges. The universal head can be configured to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges.
-
Multi Round Stainless Steel Cartridge Housings
Read moreMulti round cartridge vessels feature a universal bottom cup to suit double open ended, code 8 (222 o rings/fin) or code 3 (222 o rings / flat) cartridges. Our vessel design therefore provides versatility – by simply exchanging the cartridge top sealing components, the vessel can be converted to suit either double open ended cartridges or to suit code 3 and 8 cartridges. For use with double open ended cartridges, vessels are provided with a cup and spring component which achieves both top sealing and cartridge core location, and a compression plate.
-
Plastic Cartridge Housings
Read morePlastic Housings – For applications involving non-aggressive fluids, these are a low cost, small sized single cartridge housings to suit 10″ or 20″ cartridges. They consist of a polypropylene body and screw on lid which forms a leak proof seal by compression of an o ring. The body can either be opaque or clear. 1/2″ – 1 1/2″ BSP screwed inline connections are available as standard. An optional pressure release button is available on the inlet port. Available accessories include spanners and mounting brackets.